33AW-CS2 33AW-CB01 33AW-RAS02 33AW-RRS01 60STS020E03 60STS030E03 60STD020E03 60STD030E03 80AW9017 80AW9023 80AW9024 80AW9025 80AW9026
Additional user interface Communication kit Remote outdoor sensor Room temperature sensor Domestic hot water tank, 1 coil - 200 l Domestic hot water tank, 1 coil - 300 l Domestic hot water tank, 2 coils - 200 l Domestic hot water tank, 2 coils - 300 l CDU rubber vibration isolators
Monitors two independent comfort zones or used together with comfort module interface Necessary when adding a user interface and keeping the one on comfort module Positioned in the right place, the OAT sensor maximises comfort compared to using the condensing unit OAT sensor. Monitors indoor climate if user interface is left on indoor unit, or if two zones are covered and only one user interface is installed. Storage, 200 l of domestic hot water Storage, 300 l of domestic hot water Storage, 200 l of domestic hot water with thermal solar panel connection Storage, 300 l of domestic hot water with thermal solar panel connection Reduce the noise and vibration of the unit.
80AW 9025 & 80AWX or H 80AWX or H 80AWX or H 80AW 9025 & 80AWX or H 80AW 9025 & 80AWX or H 80AW 9025 & 80AWX or H 80AW 9025 & 80AWX or H 80AW 9025 & 80AWX or H 38AW 80AWX or H 80AWX or H 80AWX or H 80AW 9025 & 80AWX or H
Domestic hot-water three-way valve and Necessary to connect domestic hot water tank. actuator Thermal cut-out, ﬂoor heating Two-zone kit Piping kit to install domestic hot-water valve and actuator (80AW9023) inside the unit Cover panel to install two-zone kit (80AW9025) detached from comfort module Additional 3-way valve kit Necessary when connecting under-ﬂoor heating zone Allows independent control of two comfort zones Speciﬁc DHW piping kit for the installation, used together with 80AW9025 Hides piping and connections, if two-zone kit is installed remotely from the main comfort module. Possibility to have a 3-way valve also on the 2nd zone circuit
80AW 9025 & 80AWX or H
80AW 9025 & 80AWX or H
Features and advantages
Wide operating range in both heating and cooling mode offers high performance in a wide temperature range. DC inverter twin-rotary compressors with Pulse Amplitude Modulation (PAM) and Pulse Width Modulation (PWM) provide enhanced reliability, low energy consumption and smooth vibration-free operation under all operating conditions. Variable-speed fans with an innovative patented fan blade shape ensure improved air distribution at exceptionally low noise levels. Pre-set or customised selection of the appropriate climate curve for stable output capacity to match the heat load. Output to link and integrate the unit with the existing heat sources offers a dual-energy approach, increased savings and optimum comfort in all weather conditions. Able to control two independent comfort zones with a two-zone kit added to the main comfort module. Leaving water temperature up to 60 °C for radiator and domestic hot water applications, making hot water readily available. Ecodesign is the European Directive that sets mandatory requirements for Energy related Products (ErP) to improve their energy efficiency. Carrier supports initiatives to reduce the environmental impact of its products.
Adapted to your needs
Heating only or reversible comfort module Backup heating, either electrical (single-energy applications) or gas boiler (dual-energy applications) Comfort is ensured via the user interface and the possibility of integrating two leaving water temperature zones.
Electronic system management: several sensors placed in key positions in the refrigerant circuit electronically detect the operational system status. Two microcontrollers receive the input from the sensors, manage them using advanced control algorithms and optimise the refrigerant flow and the functioning of all the core components - the compressor, fan motors and the pulse modulation valve. The pulse modulation valve, a bi-flow electron