30XA 1402-1502 module 1/2 - MCHE heat exchanger (standard) 30XA 1402-1502 module 1/2 - Cu/Al heat exchanger (option 254/255)
To the water inlet of module 2
Legend All dimensions are given in mm. Required clearances for maintenance (see note)
Water outlet for standard unit For options 5, 6, 100A, 100C, 107 refer to the certified drawing. Air outlet – do not obstruct
Recommended space for evaporator tube removal Power supply and control connection Water inlet for standard unit For options 5, 6, 100A, 100C, 107 refer to the certified drawing. Control circuit connection for option 158
30XA 1402-1502 module 2/2 - MCHE heat exchanger (standard) 30XA 1402-1502 module 2/2 - Cu/Al heat exchanger (option 254/255)
Water inlet (to be connected to the water outlet of module 1)
Notes: Drawings are not contractually binding. Before designing an installation, consult the certiﬁed dimensional drawings, available on request. If the installation includes several units or if this (these) is (are) close to walls, please refer to chapters 3.13 - “Multiple chiller installation” and 3.14 - “Distance to the wall” of the installation manual to determine the space required.